Hand held labeling machine semi auto labeling machine for 3 sides
perfume square bottle
It comes with all kind of shape label and applies to a wide range
of size. For example: food, chemical, medicinal, cosmetic,
stationary, electronic, hardware battery, CD video, various oil
& other specification package products.
Main technical Parameter:
1. driven type: electric
2. Machine Size:450(L)×300(W)×600(H)mm
3. Packing Size: 500(L)×350(W)×700(H)mm
4. material:SUS304 stainless steel &high grade alumimum alloy
5. processing:labeling machine
6. Height of label:15-100mm
7. Length of label: 25-100mm
8. Accuracy of labeling:0.5mm
9. Labeling speed:20-50pcs/min
|2||Label pulling motor||GPG(Taiwan)||1|
|3||Label pulling motor gear box||GPG(Taiwan)||1|
|4||Label outing detect magic eye||LEUZE(Germany)||1|
details of labeling machine:
1. Control Panel:(positioning labeling and automatic sensor are optional functions,
appropriate sensors are needed.)
2).motor speed control knob
2. label sensor installment
a. The label must goes through the detective slot and doesn’t touch
b. Tighten the traction device after the backing paper goes
c. Tighten the pressing plate to keep tension of the label easier
to be detected by the sensor .
Please refer to the packing list to install machine; you can put it
into use directly if it is packed as a whole.
2.Put on label reel
2.1 loose the handle on the label tray, put on the label reel and
lock the label tray.(notice that do not lock it too tight, it’s
suitable when you can pull the label out by hand).
Please winding label according to the method we talked before.
Under jogging condition, observe the electric eye, the red signal
(output signal)light up in the intervals between every two labels.
If the electric eye fails to work, please adjust the electric eye
according to the method we talked before.
Under automatic run condition, press the foot switch, observe label
on the labeling-peeling plate.
6.Label Position Adjustment
6.1 control the length of the peeled label that stretches out of
the label-peeling plate, it should be 0mm-2mm(if it is too long,
two labels would stick to a product; while it is too short, the
label has not be completely peeled but the product has already
Tag:tabletop labeling machine,semi automatic label applicator